Push To Connect Air Fitting
DOT 1/2 thread X 1/2 tube
Only $8.40 from us!
Scroll down for more info!
A high quality air
fitting is crucial when it comes to building a LEAK-FREE air suspension
fittings we offer are the best money can buy, hands down!
Our push to connect fittings have a lot of special
features that allow them to give you a worry and leak free
installation. These are not cheap plastic fittings that break
easily! Each of our fittings an internal brass nipple, a
rubber o-ring and a clamping mechanism to completely seal the
airline to the fitting from all sides. To install the airline
all you have to do is screw the fitting into its location and simply
insert the air line into the fitting until you feel it lock into place.
The hex on the sides of the fitting allows you to tighten up
the fitting with a simple hand wrench. Use Teflon tape or
Loctite (vibra-seal 516) thread sealant to completely seal the threads
upon installation. It couldn't be easier to install these
These will likely be the last fittings you will ever have to buy, and
the electroless nickel plating keeps them looking awesome for years!
here to return to our air ride products page for more air
fittings and other air suspension products we offer!
- 1/2 inch Pipe Thread
- 1/2 inch Tube Push to Connect
- Meets all requirements for Federal DOT
Standard 571.106* 49 CFR Ch. V
- Temperature Range: -40°F to 200°F
working pressure 0 - 1000 psi
- Electroless Nickel Plated brass body
with a low temperature BUNA-N O-ring
- For use with DOT approved Nylon® tubing
We suggest that you
should draw out your lines and fittings, and order enough to complete
your kit without running to the store every hour or two.
Other sites charge $12.99 for similar fittings
30% by shopping with us!
Our Price is
only $8.40 ea