Universal 8" Frame Notch
(8 inch weld in Set)
Only $129.99 from us!
Scroll down for more info!
Our weld-in 8
inch universal frame notch will give you the axle clearance you need
your lowered truck. A step, or "C" notch is required
to get your truck lower to the ground in the
rear. After installing, your rear axle will be able
to travel upwards 8 inches past the original location of the frame rail
where you would normally bottom out! This is installed by welding it to
the rear frame rails directly above your axle and then cutting the
frame between the notch area.
Sold by the pair
Weld on installation
Universal design allows for installation on almost any truck
Provides 8 inches of additional space for rear axle to
Constructed of 3/16" thick steel to support the load on the