4 link tab
(Short)

Only $7.00 from us!

Our 4 link mounting tabs are for those fabricators out there that want to build their own 4 link setup from scratch.  These are used to create four link, or three link mounts on your car or truck's cross member or frame rails.  They must be welded in place.  Each is lazer cut from  3/16 inch steel.  These tabs give you some extra length just in case you need to lift your link bars a little higher off of the cross member.  You can always trim them down to the exact height you need of course.  These tabs feature extra srength due to the metal "thickness" and will look a heck of a lot better than tabs cut with a grinding disc on your shop floor!  Perfect your 4 link setup with our tabs!