S10 Front Air Bag Cups

 Our laser cut s10 air bag cups are just what you need to install air suspension in the front of your custom S10 or S15.  These cups are constructed of 1/4 inch steel and are very precise.  They are pre-welded so you don't have to worry about putting them together before installing.  The upper cups easily bolt in place after removing the factory coil spring and shock.  The upper cup slides up into the frame rail where the spring was originally.  It  is held in place by the center stud that goes through the hole where the shock originally mounted to the frame rail.  The lower cups sit in the lower control arm where the factory spring sat and are held in place by two additional studs and nuts.  The mounting holes are cut out to allow you to mount these to virtually any company's air bag.  Studs are welded flush to allow the cups to sit flat on the bags.