Rear Airbag Cups
For Impala Caprice and Roadmaster

Our rear airbag cups for 91-96 Impala, Carprice, and Roadmaster are just what you need to get the rear of your B-Body closer to Earth!  These cups fit perfectly in the rear of your B-body.  The upper cups fit into the cross-member pocket where the top of the OE spring originally rested against, and the lower cups sit on the axle housing spring perches.  All you have to do to install is bolt the upper and lower cups to the airbag of your choice. Then remember to run your air line to the bag and use a  threaded rod, washer and nut to hold the bag/cup assembly to the upper crossmember (there's a hole in the center of where the spring was).  Then the lower "cups" sit on the axle spring perch.  Tack weld the lowers in if you feel it to be necessary ( I doubt you will because the fit so well!).  These cups are constructed of high-strength steel for decades of use.  The single port and bolt holes are compatible with any brand air bag.