Universal 8" Step Notch
(8 inch weld in set)
Only $129.99 from us!
Scroll down for more info!
Our weld-in 8
inch universal step notch will give you the axle clearance you need for
your lowered truck. A step, or "C" notch is required
to get your truck lower to the ground in the
rear. After installing, your rear axle will be able
to travel upwards 10 inches past the original location of the frame
rail where you would normally bottom out! This is installed by welding
it to the rear frame rails directly above your axle and then cutting
frame between the notch area.
Universal design allows for installation on almost any truck
Provides 10 inches of additional space for rear axle to travel
Constructed of 3/16" thick steel to support the load on the chassis
weld on installation