Rear Airbag brackets
For 65-70 Chevy Impala and Wagon
Only $84.99 from us!
Scroll down for more info!
Our rear airbag brackets
your 65-70 Chevy Impala and Chevy Wagon are just what you need
the rear of your Classic Chevy closer to Earth! These cups
perfectly in the rear of your Impala or Wagon and simply bolt in place!
The upper cups fit into
the cross-member pocket where the top of the OE spring originally
rested against, and the lower cups sit on the axle housing spring
All you have to do to install is bolt the upper and
lower cups to the airbag of your choice. Then remember to run your air
line to the bag and use a threaded rod, washer and nut to
hold the bag/cup assembly to the upper crossmember (there's a hole in
the center of where the spring was). Then the lower "cups"
sit on the axle spring perch. Tack weld the lowers in if you
feel it to be necessary ( I doubt you will because the fit so
well!). These cups are constructed of high-strength
steel for decades of use. The single port and bolt holes are
any brand air bag.