Our weld-in 8
piece, 8 inch S10 step notch will give you the axle clearance needed
to get your truck lower to the ground in the rear.
After installing your rear axle will be able to travel
upwards past the original location of the frame rail where you would
normally bottom out on! This is installed by welding it to the rear
frame rails directly above your axle and then cutting the frame between
the notch area.
Sold by the pair
Specifically designed for S-10 minitrucks!
Give 8 inches of additional space for rear axle to travel
3/16" thick steel to support the load on the chassis
Plates are already cut to help with assembly and installation